935 Motorsports

Greddy Profec E-01                 Need parts?  email sales@935motorsports.com

A multifunction display that you can dash mount or custom install anywhere in the vehicle.  It has a separate remote controller to adjust settings.  Uses an SD Memory Card to store settings and data log information.  You can connect it to a Greddy Emanage system for further tuning, such as air/fuel.

This latest model boost controller features following things.

* EL large screen to check all the information accurately.
* High sensitive pressure sensor measures up to 300 kpa of boost.
* Compact solenoid valve allows you to install it anywhere you want.
* Boost control function can be chosen from AUTO or MANUAL mode.
* To obtain steady boost pressure, this boost controller features GAIN function.
* Start-Boost-function allows you to adjust how quickly you want that boost.
* By inputting individual boost correction on each engine rpm, you can set boost more precisely.
* Peak-Hold-function shows maximum boost in the screen, which have been recorded so far.
* Warning-function alarms you by LED and beep sound when the actual boost becomes over the set boost.
* Limiter-function decreases boost to the point you set when the actual boost becomes over the warning boost.
* Each data and program are recorded in SD card. It enables the system to be upgraded in the future.
* By using USB cable (not included in the kit), this boost controller can work with GReddy e-manage. Even if you don't have lap-top computer, you can set the data of e-manage and also save it by using the hand-set.
* All the data on the screen can be recorded and you can play-back them later. MAP-trace-function of e-manage can be recorded and played-back as well.
* If you purchase an optional pressure sensor harness, you can use the pressure sensor in this kit with e-manage, etc...